WiFi G Bridge VAP11G Setup Instruction

It's quite simple to make this WiFi Bridge to work.

First you need to put the password of your WiFi network to the WiFi Bridge, so the WiFi Bridge can communicate with your network.
To do this, a Windows® PC with an available network Port(RJ45) and USB port is required.
Install the setup software which comes with the WiFi Bridge and restart your computer after the installation. Run the setup program that you just installed and follow its instruction. Here to see the User Manual (pdf)
An orange light on the WiFi Bridge should be on during the installation.

If your computer has a wireless connection already, I recommend that you disable the wireless connection during the time you setup the WiFi Bridge.

After you set up the wireless settings properly on to the WiFi Bridge (it matches your Router's wireless security settings), your computer should now connect to your network wirelessly via the WiFi Bridge. A blue light on the WiFi Bridge will be turned on. (Flashing means it is downloading / uploading data)

Now you can attach the WiFi Bridge to the device which you want to make it to work wirelessly.

Tips Provide a power to the WiFi Bridge and wait for 10~40 seconds, if a blue light is on then it means that your WiFi Bridge has connected to a wireless network and has worked already. Otherwise it is not working.

I had a problem with my XBox 360 when I installed it for the 1st time. My XBox showed the wireless was connected but I couldn't sign up. My Xbox also showed me a message: Windows® Live Center wanted to upgrade my XBox sth. like that. I just allowed the upgrade, then everything worked fine.